Can it make the outer cover too?
The ZDH-700B is presented as a dedicated wing maker. A cover-making process should be planned separately.
Featured HORDA equipment
ZDH-700B collapsible box wings making machine
A dedicated machine for forming the five-board side-wing structure used in collapsible rigid boxes. Match it with the cover, lining and assembly operations your finished box needs.
Five-board wings180 × 700 mm maximumDedicated process
Discuss your wing layout ↗
Catalogue family image: this spread is headed ZDH-700B, but the pictured machine decal reads ZDH-700K. Specifications below are for ZDH-700B.
Where it fits
Make the side wings, not an entire finished box.
The ZDH-700B is listed as a collapsible box wings making machine for five-board structures. It feeds board and face paper, applies glue, registers the materials and forms the wing component.
A complete folding gift box may also need a cover, lining, magnetic or tab elements, positioning and final assembly. The production-line plan should state who performs each step.
View collapsible box applications ↗Dedicated wing production
Use it when the side-wing component is the specific process you need to automate.
Check the five-board layout
Send board arrangement, fold lines, face-paper size and finished wing dimensions.
Design the hand-off
Plan how formed wings reach cover-making and final box assembly.
Catalogue process
Form the foldable side-wing part.
01Feed face paper and board
02Apply glue
03Correct and register position
04Fold short and long edges
05Collect the side wings
2026 catalogue values
ZDH-700B at a glance.
Catalogue values support initial screening; test the exact wing sample and line hand-off before finalizing a configuration.
| Item | Catalogue value |
|---|---|
| Maximum product size | 180 × 700 mm |
| Minimum product size | 50 × 200 mm |
| Face paper | 100–250 g |
| Center-board thickness | 1.0–3.0 mm |
| Side-board thickness | 0.5–2.0 mm |
| Catalogue speed | 25–35 pieces/min |
| Positioning accuracy | ±0.1 mm |
| Power | 20 kW |
| Machine dimensions | 9400 × 3500 × 1900 mm |
Source: HORDA 2026 catalogue, ZDH-700B specification column. Speed and accuracy depend on the actual material and acceptance method.
Buyer questions
Define the wing and the rest of the line.
What is the difference from DFM-1000B?
DFM is multi-function and includes case-making and lining functions. ZDH concentrates on the wing component.
Does it make a complete collapsible box?
No. The wing is one component. Box design may require other stations and final assembly.
What sample is most useful?
Provide the flat five-board wing, an assembled box and the intended cover so all component hand-offs can be checked.
This independently operated website presents catalogue information for project review. Confirm the current model revision, configuration, acceptance criteria and commercial responsibility in the written quotation.
Video and project evidence
Publish only approved source material.
No manufacturer-approved video file or attributable customer case has been supplied for this model yet. This section will be updated when the original media, customer permission and measurable project facts are available.
Video material needed
Original machine footage, model identity, process shown, output conditions and permission to publish.
Case evidence needed
Country, product, material, machine configuration, acceptance method, result and customer authorization.