Output component
Confirm what round-corner case making machines must deliver to the next production operation.
Equipment category
Round-Corner Case Making Machines
Round-Corner Case Making Machines. Compare the production step before selecting a machine family.
Evidence-gated draft: technical facts, images and application proof require review before search indexing.Equipment category review
Define what round-corner case making machines must achieve.
A round corner case making machine decision starts with the real product, complete format range, material specification, accepted-output target and the operation that receives the result.
Supplied visual evidence
Equipment and process references
These supplied equipment images support process discussion. Confirm the exact model revision, guarding, options and configuration in the current written offer.
Image source: materials supplied for this project. Product, machine and facility identity must be confirmed against the current quotation before making a contractual claim.
Catalogue-backed comparison
Screen the dedicated round-corner platform by size and material.
Use the values below for initial screening. Final fit requires the current technical offer and an actual-material sample trial.
Catalogue speed is a published machine range, not a promise of accepted production output. Product format, material behavior, changeover and inspection criteria must be tested.
Dedicated modelZFM-500B is presented specifically for automatic round-corner case making.
Compact minimumThe catalogue lists a 60x120 mm minimum and 350x500 mm maximum format.
Appearance proofCorner radius, wrap allowance, paper stretch and wrinkle acceptance require a real-material sample.
| Model | Maximum / minimum size | Board thickness | Catalogue speed | Positioning |
|---|---|---|---|---|
| ZFM-500B | 350x500 / 60x120 mm | 1.0-4.0 mm | 25-35 pcs/min | ±0.1 mm |
Source: HORDA 2026 equipment catalogue supplied for this project. Confirm the latest machine revision before ordering.
Equipment selection brief
Qualify the radius, allowance and surface finish together.
A round-corner case needs a dedicated forming route, but the visible result still depends on board geometry and the way the covering sheet stretches around the radius.
01Define corner geometrySupply the exact radius, board thickness and finished-case drawing.
02Set wrap allowanceSize the covering sheet around the real material stretch and turn-in requirement.
03Trial registrationCheck artwork position near the curved edge and other critical panels.
04Form the cornersTune the folding sequence to control pleats, wrinkles and exposed board.
05Approve repeatabilityInspect consecutive pieces for symmetry, surface marks and corner consistency.
Variables that change the equipment decision
- Corner radius and board thickness
- Covering-sheet weight, stretch and coating
- Artwork near the curved edge
- Accepted pleat, wrinkle and edge standard
Continue to related pages
Scope boundary: The catalogue format range screens the project; only the production board and covering stock can approve the final corner appearance.
Decision framework
Three checks for round-corner case making machines.
Use these checks to keep the round corner case making machine discussion tied to measurable inputs, outputs and responsibility boundaries.
Working range
Check minimum, maximum and frequent jobs instead of one nominal round corner case making machine format.
Acceptance result
Judge round-corner case making machines by consecutive accepted pieces, not maximum catalogue speed alone.
Information for review
Prepare a complete round corner case making machine brief.
The six items below reduce assumptions when evaluating round-corner case making machines and make competing technical offers easier to compare.
Required componentRecord this item specifically for round-corner case making machines rather than relying on a generic machine request.
Minimum formatGive the minimum, maximum or current condition that applies to the round-corner case making machines project.
Maximum formatAttach a drawing, photograph, specification or physical sample relevant to round-corner case making machines.
Frequent jobsState how this round-corner case making machines requirement will be inspected and accepted.
Registration needExplain present production, job mix and the expected change connected with round-corner case making machines.
Downstream processConfirm who supplies, approves and supports this part of the round-corner case making machines scope.
Project sequence
Move round-corner case making machines from sample to written scope.
Keep the same product definition, material set and acceptance method throughout the round corner case making machine trial, quotation and order.
01Define the output component for Round-Corner Case Making Machines
02Measure the complete job range for Round-Corner Case Making Machines
03Test material and registration for Round-Corner Case Making Machines
04Record accepted output for Round-Corner Case Making Machines
05Confirm written scope for Round-Corner Case Making Machines
Frequently asked questions
Questions about round-corner case making machines.
Use the answers as a starting checklist and confirm project-specific statements with current technical evidence.
How do I choose among round-corner case making machines?
Start with the output component, flat size range, material set, registration need, job mix and the next production operation.
Is maximum speed the main selection criterion?
No. Accepted output, changeover, minimum format, process quality, labor and line balance can be more important.
What is needed for an accurate quotation?
Provide samples, flat drawings, material details, size range, target output, electrical standard and desired supply scope.
Can existing equipment be integrated?
Often yes, but interfaces, heights, buffers, control responsibility and acceptance of the combined line must be reviewed.
Primary topic: round corner case making machine. This page remains excluded from search while its facts, images and application proof are under review.
Explore next
Related planning pages.
Continue from round-corner case making machines to the most relevant equipment, process, application or buyer-information page.
