Is the DFM-1000B the same as ZDH-700B?
No. DFM is presented as a multi-function machine; ZDH is dedicated to collapsible box wings. Choose by the components and job mix you need.
Featured HORDA equipment
DFM-1000B collapsible box cover & wings machine
One multi-function platform for case making, collapsible box wing making and inner-paper lining. Built in the catalogue around varied, premium box jobs that require several production modes.
Case-making modeWing-making modeInner lining function
Discuss your box ↗
Where it fits
Make several collapsible-box components on one platform.
The 2026 catalogue describes three functions: case making, collapsible side-wing making and inner lining. This makes the DFM-1000B a candidate when orders mix cover and wing work, especially in short-run or customized premium packaging.
It does not automatically mean every finished box is completed without another station. The required structure, magnetic parts, folding, final assembly and acceptable output should be checked against the sample and line plan.
Explore collapsible gift boxes ↗Three functions in one machine family
Use cover, wing and lining work as the starting point for a mode-by-mode sample test.
Two distinct format ranges
The catalogue lists separate cover and wing dimensions; do not apply the cover maximum to wings.
Choose by job mix
Compare it with the dedicated ZDH-700B if wing production is the primary task.
Production modes
Plan the work by component.
01Feed face paper and board
02Apply glue and register
03Form a cover or side wing
04Apply inner lining as required
05Collect parts for later assembly
The exact sequence depends on the selected machine mode and box structure. A finished collapsible box may require additional assembly.
2026 catalogue values
DFM-1000B format and performance.
The brochure shows two format ranges separated by a slash; the table below presents them as cover and wing work for planning.
| Item | Case/cover work | Wing work |
|---|---|---|
| Maximum product size | 600 × 1050 mm | 180 × 700 mm |
| Minimum product size | 140 × 240 mm | 50 × 200 mm |
| Face paper | 100–250 g | |
| Center-board thickness | 1.0–3.0 mm | |
| Side-board thickness | 0.5–2.0 mm | |
| Catalogue speed | 25–35 pieces/min | |
| Positioning accuracy | ±0.1 mm | |
| Power listed | 18 / 20 kW; confirm the selected configuration | |
| Machine dimensions | 12500 × 3700 × 1900 mm | |
Source: HORDA 2026 catalogue, DFM-1000B narrative and specification spread. Mode mapping is inferred from the adjacent cover/wing process labels and should be checked for a quotation.
Buyer questions
Compare flexibility with a dedicated wing machine.
Does it fully assemble the box?
The catalogue names cover, wing and lining functions. Confirm any separate folding, magnets, positioning and final assembly operations for the actual structure.
Are the two size ranges interchangeable?
No. The brochure lists a larger cover range and a smaller wing range. Submit separate drawings for each component.
What should be tested?
Test both modes, changeover, board and face-paper behavior, finished-part quality and sustained output on real samples.
This independently operated website presents catalogue information for project review. Confirm the current model revision, configuration, acceptance criteria and commercial responsibility in the written quotation.
Related paths
Build the full collapsible workflow.
Video and project evidence
Publish only approved source material.
No manufacturer-approved video file or attributable customer case has been supplied for this model yet. This section will be updated when the original media, customer permission and measurable project facts are available.
Video material needed
Original machine footage, model identity, process shown, output conditions and permission to publish.
Case evidence needed
Country, product, material, machine configuration, acceptance method, result and customer authorization.