Does this machine make a complete rigid box?
It makes the wrapped case. A finished book-style or rigid box may also require lining, box body forming and assembly.
Featured HORDA equipment
ZFM-700/1000K automatic case making machine
Make wrapped hardcover cases with four photoelectric detection and servo positioning. Choose the 700K or 1000K format around your flat case size, board layout and production target.
Four photoelectric detectionServo positioning700K / 1000K sizes
Discuss your sample ↗
Where it fits
Produce the case, then plan the next step.
The ZFM-K series wraps face paper around board to form a hard case. It can serve hardcover books, folders, calendars and book-style box covers. Inner lining, box body forming and final assembly are separate operations unless included in a wider line.
Use the finished sample and its flat layout to confirm the right format. The larger 1000K is not automatically the better choice: compare minimum size, usable board arrangement, output and floor space.
Explore hardcover applications ↗Match the open size
Compare the largest and smallest flat cases in your orders, not only the finished closed-box size.
Check material behavior
Test your actual face paper, board, glue and finish to assess feeding, wrapping and edge quality.
Define downstream operations
Specify whether lining or box assembly is part of the purchase or handled by your existing equipment.
Catalogue process
From paper and board to a wrapped case.
01Feed face paper and board
02Apply glue to face paper
03Register and correct position
04Fold and wrap four edges
05Collect the formed case
2026 catalogue values
Compare 700K and 1000K.
These are catalogue specifications. Final project performance should be checked with the actual sample and quoted configuration.
| Item | ZFM-700K | ZFM-1000K |
|---|---|---|
| Maximum product size | 450 × 720 mm | 600 × 1050 mm |
| Minimum product size | 90 × 180 mm | 140 × 240 mm |
| Face paper | 100–250 g | 100–250 g |
| Board thickness | 1.0–3.0 mm | 1.0–3.0 mm |
| Boards per case | 1–6 | 1–6 |
| Catalogue speed | 20–35 pieces/min | 20–30 pieces/min |
| Positioning accuracy | ±0.2 mm | ±0.25 mm |
| Power | 16 kW | 18 kW |
| Machine footprint | 8500 × 2600 × 1500 mm | 10440 × 3000 × 1500 mm |
Source: HORDA 2026 catalogue, case-making specifications spread. Speed and precision are catalogue figures, not a guaranteed result for every material.
Buyer questions
Decide with your sample, not a model number alone.
When should I select the 1000K?
When the flat case exceeds the 700K format or your board layout requires the larger working area. Check the larger model’s minimum size and plant space too.
Can I send a physical sample?
Yes. A closed sample, open sample and flat layout are the best starting points for checking fit and test criteria.
What belongs in the quotation?
Confirm configuration, sample acceptance, electrical requirements, delivery scope, installation, training and after-sales responsibility in writing.
This independently operated website presents catalogue information for project review. Confirm the current model revision, configuration, acceptance criteria and commercial responsibility in the written quotation.
Video and project evidence
Publish only approved source material.
No manufacturer-approved video file or attributable customer case has been supplied for this model yet. This section will be updated when the original media, customer permission and measurable project facts are available.
Video material needed
Original machine footage, model identity, process shown, output conditions and permission to publish.
Case evidence needed
Country, product, material, machine configuration, acceptance method, result and customer authorization.